1) SIMULATION OF DISTRIBUTIVE AND DISPERSIVE MIXING IN EXTRUDER WITH  ROTATIONAL BARREL SEGMENT

Ivan Gajdoš¹, Slota Ján¹, Pavol Štefčák

Technical University of Košice, Department of Technologies, Materials and  CAx Technologies

2) ELECTROSPINNING POSSIBILITIES FOR NATURAL PROTEINS WITH BIOACTIVE ADDITIVES

AKVILĖ ANDZIUKEVIČIŪTĖ JANKŪNIENĖ¹, UGNĖ ZASČIURINSKAITĖ¹, AISTĖ BALČIŪNAITIENĖ², JONAS VIŠKELIS², ERIKA ADOMAVIČIŪTĖ¹, CARMEN GAIDAU³, MARIA RAPA⁴, VIRGILIJUS VALEIKA⁵, VIRGINIJA JANKAUSKAITĖ¹

¹Kaunas University of Technology, Studentu st 56, Kaunas 51424, Lithuania

²Lithuanian Research Centre for Agriculture and Forestry, Institute of Horticulture, 54333 Babtai, Lithuania

³INCDTP – Leather andFootwear Research Institute Division, 93 Ion Minulescu St, sector 3, Bucharest, Romania

⁴Politehnica University of Bucharest, Faculty of Material Sciences and Engineering, 313 Spl. Independentei, 060042 Bucharest, Romania

⁵Kaunas University of Technology, Radvilenu st.t 19, Kaunas 51424, Lithuania

3) POLYLACTIDE STARCH-CONTAINING COMPOSITES: PREPARATION AND PROPERTIES

ANDRII MASYUK, DMYTRO KECHUR, BOZHENA KULISH, VOLODYMYR LEVYTSKYI

Lviv Polytechnic National University, 12 S. Bandery str., Lviv, Ukraine

4) NEW TECHNOLOGY OF TUBULAR PRODUCTS BASED ON COMPOSITE HYDROGELS PRODUCTION

B. BEREZHNYY¹, O. GRYTSENKO¹, M. KUSHNIRCHUK², Ľ DULEBOVÁ³

¹Lviv Polytechnic National University, 12 St. Bandera str., Lviv, Ukraine

²Danylo Halytsky Lviv National Medical University, 5 Ogienko str., Lviv, Ukraine

³Technical University of Košice, 74 Mäsiarska str., Košice, Slovakia

5) AN EXPERIMENTAL STUDY ON THE PROPERTIES OF RECYCLETED POLYPROPYLENE HIGHLY FILLED WITH THE SAND AS A MODERN COMPOSITE MATERIAL

ŁUKASZ GARBACZ

Lublin University of Technology, Nadbystrzycka 38 D, Poland

6) SYNTHESIS OF A NEW SUPRAMOLECULAR POLYMERIC SYSTEM BASED ON β-CYCLODEXTRIN AND BISPHENOL S

I. QUARATESI^1,2,3, R. GLIUBIZZI², P. NERI¹, C. GAETA¹, E. BADEA^3,4

¹ Dipartimento di Chimica e Biologia “A. Zambelli”, Università di Salerno, Via Giovanni Paolo II 132, I-84084 Fisciano (SA), Italy.

² BI-QEM SPECIALTIES SPA, Zona industriale – 84021 Buccino (SA), Italy.

³ National Research and Development Institute for Textile and Leather – Research Institute for Leather and Footwear (INCDTP-ICPI), Ion Minulescu Str. 93, 031215 Bucharest, Romania.

⁴ Department of Chemistry, Faculty of Sciences, University of Craiova, Calea Bucuresti Str. 107 I, 200512 Craiova, Romania.

7) FILTRATION DRYING OF FOOD INDUSTRY WASTE

O. IVASHCHUK, V. ATAMANYUK, R. CHYZHOVYCH, Z. HNATIV, S. KIIAIEVA

Lviv Polytechnic National University, 12 Bandery str., Lviv, 79013, Ukraine

8) ADVANCED POLYMER COMPOSITES FOR FLEXIBLE ELECTROCHEMICAL ENERGY STORAGE

V. KHOMENKO, D.  PUTLUN,  B. SAVCHENKO, N. SOVA

Kyiv National University of Technologies & Design 2, Nemirovich-Danchenko str., Ukraine

9) THERMOSTABLE POLYMER COMPOSITES FOR TRIBOLOGICAL PURPOSE

OLEH KABAT¹, VOLODYMYR SYTAR¹, JANIS ZICANS², REMO MERIJS MERI²

¹Ukrainian State University of Chemical Technology, Ukraine

²Riga Technical University, Latvia

10) POLYHYDROCYBUTYRATE: FEATURES OF BIOSYNTHESIS, IDENTIFICATION AND PROPERTIES

SEMENIUK I. V.¹, MELNYK Yu. Ya.², STETSYSHYN Yu. B.²,SEMENYUK N. B.², SKOROKHODA V. Y.², KARPENKO O. V.¹

¹Department of Physical Chemistry of Fossil Fuels of the Institute of Physical–Organic Chemistry and Coal Chemistry named after L. M. Lytvynenko of the National Academy of Sciences of Ukraine

²Lviv Polytechnic National University, 12 S. Bandera Str., Lviv, Ukraine

11) WATER REPELLENT SURFACES STABILITY

MYRONYUK O., BAKLAN D.

National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, 37, Prosp. Peremohy, Kyiv, Ukraine